Greenway water dispenser is a water dispenser that is manufactured by Greenway – a manufacturer of water dispensers that are found in many homes and offices. Greenway water dispenser is known to provide clean bottled water stored in 3- to 5-gallon jugs.
Greenway water dispenser easily distributes hot, cold or room-temperature water at the push of a button. Cleaning the Greenway water dispenser is also an easy task, and should be done every four months to keep the unit clean and free of bacteria. This filter system includes an electronic filter timer that notifies you when the filter needs to be replaced.
Greenway water dispenser is composed of several parts that work together to provide cleaner water. That is why, when first unpacked, all of the parts should be washed in warm, soapy water to remove any dirt or oils that may have collected during production and shipping. Rinse and dry the parts after cleaning.
Then, press the “Reset” button on the electronic filter change reminder. When reset, the timer will set to 180 days. It means that the filter should be changed every 180 days to ensure high water quality.
Related to the assembly of Greenway water dispenser, this water filter system works when water is placed in the upper chamber of the unit and moves through the filter to the lower chamber where it sits, ready to be dispensed. The lower chamber should be put together first.
Twist the float onto the bottom of the lower chamber and place the chamber in the water dispenser. Next, place the white chamber ring that connects the upper and lower chambers.
Submerge the filter in cold water until air bubbles stop coming out of the filter. Let the filter sit in the water for at least 30 minutes. Line the two posts of the pre-filter with the holes on the inside of the upper chamber, and push down to snap the pre-filter in place.
The hole in the top of the filter should line up with the post on the bottom on the upper chamber, after which you should twist the filter until it is secure to the upper chamber. Place the upper chamber over the lower chamber and Greenway water dispenser is now set up and ready for use.
Take care to keep the Greenway water dispenser submerged at all times. The water level on the lower level should always be between the minimum and maximum fill lines on the side of the chamber. Add water to the unit as needed to keep the water levels between those lines.
Full-Size 3-Temp Water Dispenser with Fridge (Greenway) is one of Greenway water dispensers you can find in the market. Using this Greenway water dispenser, you can dispense hot, room & cold water. Energy saving EZ-heat feature provides hot water in minutes, without the cost of constantly re-heating water.
This dispenser is completed with convenient refrigerator compartment with dual thermostat for temperature consistency, convenient night light, ready-To-Dispense indicator lights, and easy to use push buttons with childproof safety lock for hot water.
In addition, this Greenway water dispenser features bottle support collar to ensure a secure, leakproof fit, stainless steel reservoirs for superior long-lasting reliability, and CFC free, high efficiency compressor for improved cooling. This dispenser is for use with 3 or 5 gal (12 or 19 L) bottles.
Comments on this entry are closed.